FERRULE 1SN
2000-03
Product info
Non-skive
Product group
200
Type
Ferrule
| Part no. | Hose ID | Used with |
|---|---|---|
| 20000304 | 1/4" | EN1SN |
| 20000306 | 3/8" | EN1SN |
| 20000308 | 1/2" | EN1SN |
| 20000310 | 5/8" | EN1SN |
| 20000312 | 3/4" | EN1SN |
| 20000316 | 1" | EN1SN |
:
ASSEMBLY INSTRUCTIONS FOR REUSABLE FITTINGS WITH NON-SKIVE FERRULES ON HIGH PRESSURE HOSES EN 853 1SN AND EN 853 2SN
1. Cut the hose transversely. Secure the fitting ferrule in a vice. Make sure you are using the right ferrule, with one or two rings around the neck. One ring for 1SN-hoses and two rings for 2SN-hoses.
2. Screw the hose on the ferrule until it stops. The fitting ferrule has left-handed threads.
3. Lubricate the hose and the insert. Place the ferrule in the vice. Insert the nipple so far that the hexagonal meets the ferrule.
 |
|
