EGEFLEX 1
1101-00
100
Synthetic oil resistant rubber
Weather and oil resistant rubber
-40
+100
Oil
One braid of steel wire
1:4
A hose for applications with medium pressure and return lines. Equivalent to EN 853 1SN (25.0–4.0 MPa).
4200-11-xx
Other
| Part no. | ID mm | ID inch | OD mm | Bend rad mm | WP MPa | Weight kg/m |
|---|---|---|---|---|---|---|
| 11010003 | 5 | 3/16" | 11.8 | 90 | 25 | 0.19 |
| 11010004 | 6,50 | 1/4" | 13.4 | 100 | 22,50 | 0.21 |
| 11010005 | 8 | 5/16" | 15 | 115 | 21,50 | 0.24 |
| 11010006 | 9,50 | 3/8" | 17.4 | 130 | 18 | 0.33 |
| 11010008 | 13 | 1/2" | 20.6 | 180 | 16 | 0.41 |
| 11010010 | 16 | 5/8" | 23.7 | 200 | 13 | 0.45 |
| 11010012 | 19 | 3/4" | 27.7 | 240 | 10,50 | 0.58 |
| 11010016 | 25 | 1" | 35.6 | 300 | 8,80 | 0.88 |
| 11010020 | 32 | 1 1/4" | 43.5 | 420 | 6,30 | 1.22 |
| 11010024 | 38 | 1 1/2" | 50.6 | 500 | 5 | 1.47 |
| 11010032 | 51 | 2" | 64 | 630 | 4 | 1.98 |
ASSEMBLY INSTRUCTIONS FOR REUSABLE FITTINGS WITH NON-SKIVE FERRULES ON HIGH PRESSURE HOSES EN 853 1SN AND EN 853 2SN
1. Cut the hose transversely. Secure the fitting ferrule in a vice. Make sure you are using the right ferrule, with one or two rings around the neck. One ring for 1SN-hoses and two rings for 2SN-hoses.
2. Screw the hose on the ferrule until it stops. The fitting ferrule has left-handed threads.
3. Lubricate the hose and the insert. Place the ferrule in the vice. Insert the nipple so far that the hexagonal meets the ferrule.
 |
|
